HOW TO CONNECT YOUR HOME STEREO
Note: If your stereo has an unused LINE OUT jack,
see instruction A below. If the LINE OUT jack is
being used, see instruction B.
A. Plug one end of a long 1/8” to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into the LINE OUT jack on your stereo. Note: While
the cable is plugged into the LINE OUT jack, do not
plug your headphones into the headphone jack on
the console.
A
CD
VCR
Amp
LINE OUT
LINE OUT
Audio Cable
CD
VCR
Amp
LINE OUT
LINE OUT
A
B. Plug one end of a long 1/8” to RCA stereo audio
cable (available at electronics stores) into the input
jack on the console. Plug the other end of the cable
into an RCA Y-adapter (available at electronics
stores). Next, remove the wire that is currently
plugged into the LINE OUT jack on your stereo and
CD
plug the wire into the unused side of the Y-adapter.
VCR
Plug the Y-adapter into the LINE OUT jack on your
A
stereo. Note: While the Y-adapter is plugged into the
Amp
LINE OUT
LINE OUT jack, do not plug your headphones into
the headphone jack on the console.
B
CD
VCR
Amp
LINE OUT
B
RCA
Audio
Y-adapter
Cable
Wire removed from
LINE OUT jack
B