Summary of Contents for ProForm Restoration 831.270000
Page 1
Model No. 831.270000 Serial No. The serial number is found in the loca- tion shown below. Write the serial num- ber in the space above for reference. Serial Number Decal (on frame) CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or serious injury to persons, read all important precautions before using the massage chair. READ AND FOLLOW ALL INSTRUCTIONS 1. Read all precautions and instructions in this manual before using the massage chair. 2.
Before calling, please note the product model number and serial number. The model number is 831.270000. The serial number can be found on a decal attached to the massage chair (see the front cover of this manual for the location).
ASSEMBLY Place all parts of the massage chair in a cleared area and remove the packing materials. Do not dispose of the packing materials until the massage chair is fully assembled. For your convenience, the massage chair can be assembled in three simple steps. An adjustable wrench 1.
HOW TO OPERATE THE MASSAGE CHAIR DIAGRAM OF THE HAND CONTROL A. Power IndicatorÑThis indicator lights when the power is on. B. Power SwitchÑThis switch turns the power on and off. C. Mode IndicatorsÑThese indicators show which mode is selected. D.
Page 7
2. The massage chair features three separate massage zones: the upper back, lower back, and thigh zones. The massage zones are controlled with the Upper Back, Lower Back, and Thigh buttons. Pressing a button once will activate a massage zone. Pressing the button again will turn off the massage zone.
Page 8
HOW TO REMOVE THE MASSAGE PAD FROM THE FRAME If desired, the massage pad can be removed from the frame and used on the floor or a bed. Follow the steps below to remove the massage pad. 1. Unplug the power cord from the outlet.
MAINTENANCE AND STORAGE Check the massage chair periodically to make sure that all parts are properly tightened. The massage chair can be cleaned with a low-power hand-held vacuum or a dry cloth. IMPORTANT: Never use water or solvents to clean the massage chair. If the hand control does not function properly, make sure that the transformer on the power cord is plugged into a 120-volt outlet.
SEARS, ROEBUCK AND CO., DEPT. 817WA, HOFFMAN ESTATES, IL 60179 Part No. 138564 G01374-C R0497A The model number and serial number of your PROFORM RESTORATION 2-IN-1 massage chair are listed on a decal attached to the frame. See the front cover of this manual to find the location of the decal.
Need help?
Do you have a question about the Restoration 831.270000 and is the answer not in the manual?
Questions and answers