Advertisement
10
Installing the CD-ROM reader in a host PC
Note
Refer to the guidebook included with your personal computer for instruc-
tions on installing the CD-ROM reader. This chapter gives one example
of installation.
1. Attach the mounting rails to both the left and right sides of the CD-
2. Turn off the computer, other peripherals and unplug all the cords and
3. Slide the disk drive out approximately 50 ~ 70mm (2 ~ 3 in.), but do
4. Slide the CD-ROM reader into the computer until it is even with the
DISK DRIVE
CD-ROM READER
WITH MOUNTING
RAILS
ECDR3001.PM5
ROM reader.
cables. Then remove the computer cover, face plate, mounting clips,
and keeper bracket. Refer to the Guide to Operations that came with
your computer for help with this step.
not disconnect the cables.
disk drive.
11
99.1.13, 2:36 PM
Advertisement
