5. Always disconnect iron from electrical outlet when filling with water or emptying and when not in use. 6. Do not operate iron with a damaged cord or if the iron has been dropped or damaged. To avoid the risk of electric shock, do not disassemble the iron.
Before First Use • Steam vents should be cleaned before first use. Prepare iron for steam ironing, then iron over an old cloth for a few minutes while letting the iron steam. • Many irons spit or sputter during the first few uses with tap water.
Iron 1. Turn temperature control dial to Off. Unplug and let cool. The iron takes longer to cool down than it does to heat up. 2. To empty water from iron, slowly tilt pointed end of iron down over a sink. Water will run out of water tank opening.
Page 5
• Is the Adjustable Steam Switch in the STEAM position? • Has the iron had enough time to preheat? Leaves spots. • ALWAYS empty the water tank of the iron after using. Water left in the tank may discolor clothing and soleplate. LIMITED WARRANTY...