Parent Unit Power Supply - Motorola MBP10S User Manual

NOTE
When the battery level is low, the green power LED will flash and the parent unit
will emit a warning beep once every minute. If the baby unit loses power or goes
out of range, the link will be lost and the parent unit will emit a warning beep
every 20 seconds and the green link LED on the Parent unit will continue to flash.
WARNING
Do not mix old batteries with new ones.
Keep batteries away from small children.
Do not short-circuit batteries or dispose of in fire.
Remove the batteries if this device is not going to be used for a long period of
time.
2.3

Parent unit power supply

1. Connect the small plug of the power adapter to the power connector on
the parent unit and the other end of the adapter to the mains power socket
(100V-240V ~ 50/ 60Hz).
NOTE
Only use the enclosed adapter (5V DC/600mA).
2. Press and hold
connected to power supply.
3. Press and hold
Getting Started
. The Power (ON /
to switch off the parent unit.
) LED will illuminate red when it is
9