Download  Print this page

Printronix 182043 Specification

Rfid label guide specification 96 bit, epc class 1, squiggle antenna
Hide thumbs
   

Advertisement

Printronix Guide Specification
RFID Label
96 Bit, EPC Class 1
Squiggle Antenna
Disclaimer
Notwithstanding anything to the contrary in this document, the guidelines, suggestions and other information
included in this document or otherwise provided to the recipient, including the guidelines and suggestions for
developing converted RFID labels, are provided by Printronix on an "as is" basis and without warranty of
any kind whatsoever, express or implied. In particular, Printronix disclaims any implied warranty of
merchantability or fitness for a particular purpose. Printronix will not be liable under any circumstances for
any damages or losses related in any way to use of the guidelines, specifications or other information,
including damages, which may be incurred as a result of labels not working properly in a specific
application. All specifications subjective to change without notice. Testing of the converted labels in the
printer is recommended prior to production quantities.
3/15/05
RFID Label Guide Specification
96 Bit Class 1 Squiggle Antenna
182043-000 Rev A
Page 1 of 5

Advertisement

Table of Contents
loading

  Related Manuals for Printronix 182043

No related manuals

  Summary of Contents for Printronix 182043

  • Page 1 RFID labels, are provided by Printronix on an "as is" basis and without warranty of any kind whatsoever, express or implied. In particular, Printronix disclaims any implied warranty of merchantability or fitness for a particular purpose.
  • Page 2 RFID labels, are provided by Printronix on an "as is" basis and without warranty of any kind whatsoever, express or implied. In particular, Printronix disclaims any implied warranty of merchantability or fitness for a particular purpose.
  • Page 3 3.8.1. Inlay location with respect to label facestock outlined in Figure 1. 3.8.2. Nominal label facestock width with Squiggle inlay is 4.0". Maximum width of label construction supported by printer is 4.5" edge to edge (4.1" is printable). 3.8.3. Minimum supported label length with Squiggle inlay is 2.0". Longer label lengths per user requirements.
  • Page 4: Contact Information

    3.9.2. Avoid storing labels in elevated temperature environment. 4. Thermal Transfer Ribbons for Printronix RFID Printers 4.1. Wax resin ribbon for best durability. Wax Resin Blend Ribbon 8500, 4.33" x 2051', package of 6 ribbons, Printronix part no. 203485-103.
  • Page 5 LEADING EDGE OF LABEL LABEL PERF (CENTERED IN GAP) Variable 2.0" min LABEL SQUIGGLE INLAY OUTLINE LINER Printronix RFID Squiggle Label Requirements for 4.0" Wide x Variable Length Label PRINTRONIX SQUIGGLE ANTENNA OUTLINE STRAP C/L of Strap 1.9375" (+0.0625", -0.0359") 4.00"...