Advertisement
Woosh GSM
CD Kit Fitting Guide
(using external controller)
Important: For your own safety you must read this manu-
al before attempting to fit any part of the motor kit to your
bike. You must also ensure that you fit the kit in strict ac-
cordance with the instructions in this manual.
Sales: 01702 435566 — Support: 01702 684444 — E-mail: support@wooshbikes.co.uk
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Woosh GSM CD Kit
Summary of Contents for Woosh GSM CD Kit
- Page 1 Woosh GSM CD Kit Fitting Guide (using external controller) Important: For your own safety you must read this manu- al before attempting to fit any part of the motor kit to your bike. You must also ensure that you fit the kit in strict ac- cordance with the instructions in this manual.
- Page 2 You will of course need to pay for the technician to install your kit, these costs are not covered by Woosh Bikes. Warranty Terms:...
- Page 3 Hints and Tips The information below is to help with common issues you may encounter during/after installation. Error Codes and what they mean: 06 E—you have a throttle that has an enable/disable button. The kit expects a twist-grip to be present and if it is disabled, it will show the error code.
- Page 4 What’s in the Box Ensure that you have all the parts shown below before going any further, if there are any missing parts, contact us on 01702 435566. This kit comprises of mid-drive motor/chain-ring, cranks, bracket-parts/fixing kit. There is also an optional additional set of cables. If you are using the “36V12.5Ah Case-08 Frame Bottle Battery Pack” kit from BMS Battery, you will not need these cables.
- Page 5 Installing the Motor You first need to remove your existing bottom bracket, slide the motor in from the right side of the bike and then fit the remaining parts as per the diagram below. Before you proceed to secure the motor in place, ensure that at least 10mm of the thread protrudes on the left side.
- Page 6 Installing the Motor cont. Align the bracket as shown and fit the two 12mm M6 bolts in place as shown below. Fit the M33 nut in place and tighten to a torque of 55-60Nm Fit the second nut and tighten this to the same torque. You should now fit the cranks.
- Page 7 Battery care: This is still relevant even if you sourced your battery elsewhere. Some care is needed to ensure your battery performs at its best and lasts as long as possible. All batteries age over time and so the distance you will get from a full charge will gradually decrease, so to ensure you get the most from your battery, follow the instructions below.
- Page 8 Support articles and FAQ’s: www.wooshbikes.co.uk/?support Email: kits@wooshbikes.co.uk Telephone: 01702 684444 (If there is no answer, leave a brief message and contact no. and someone will call you back). Support staff are available 10am to 5pm Monday to Friday. © 2015 Woosh Bikes Limited...
Need help?
Do you have a question about the GSM CD Kit and is the answer not in the manual?
Questions and answers