Download Print this page

Philips SCD530 User Manual page 7

Advertisement

EngliSh
1
2
Press and hold the on/off button 3 on the baby unit until the green power-on light goes
on. (Fig. 12)
Note: The power-on light always lights up green, even when there is no connection with the parent unit.
The nightlight lights up briefly and then fades out again.
,
The display lights up and the battery symbol appears on the display (Fig. 1).
,
After 2 seconds the temperature and humidity values are shown on the display (Fig. 1).
,

Press and hold the on/off button 3 on the parent unit until the sound level lights light up
briefly. (Fig. 15)
The display goes on and the battery symbol appears on the display (Fig. 1).
,
The LINK light flashes red and the message 'Searching' appears on the display. (Fig. 17)
,
The LINK light on the parent unit turns green and lights up continuously when a connection
,
has been established between the baby unit and parent unit. The message 'Linked' appears on
the display. (Fig. 18)
After 2 seconds the message 'Linked' disappears and the temperature and humidity values
,
are shown on the display. (Fig. 19)
The first time you switch on the parent unit, the message 'Language' appears on the display.
,
Select the desired language (see chapter 'Menu options, section 'Setting display
language'). (Fig. 20)
If no connection is established, the LINK light on the parent unit stops flashing and lights up
,
red. The parent unit beeps from time to time and the message 'Not Linked' appears on the
display. (Fig. 21)
Positioning the baby monitor
1
Place the baby unit at least  feet/1 meter away from your baby (Fig. 22).
2
Place the parent unit within the operating range of the baby unit. Make sure it is at least 
feet/1 meter away from the baby unit to avoid acoustic feedback (Fig. 11).
For more information on the operating range, see section 'Operating range' below.
Operating range
The operating range of the baby monitor is 1000 feet/330 meters in open air. Depending on the
surroundings and other disturbing factors, this range may be smaller. Indoors the operating range is
up to 150 feet/50 meters.
Dry materials
Material thickness
Wood, plaster, cardboard, glass
< 12 in/30cm
(without metal, wires or lead)
Brick, plywood
< 12 in/30cm
Reinforced concrete
< 12in/30cm
Metal grilles or bars
< 0.4in/1cm
Metal or aluminum sheets
< 0.4in/1cm
For wet and moist materials, the range loss may be up to 100%.
Features
The following features are described in chapter 'Menu options', as they can only be operated in the
menu of the parent unit:
-
Adjusting microphone sensitivity
-
Sound alert on/off
-
Setting room temperature range (minimum and maximum temperature)
Loss of range
0-10%
5-35%
30-100%
90-100%
100%
-
Temperature alert on/off
-
Vibration alert on/off
Adjusting loudspeaker volume
1
Press the volume + or – button on the baby unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 2).
2
Press the volume + or – button on the parent unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 2).
The displays give visual feedback on the volume settings of the units:
,
-
g = parent unit volume switched off/silent baby monitoring
-
h = minimum volume (parent unit and baby unit)
-
i = maximum volume (parent unit and baby unit)
Note: If the volume is set to a high level, the units consume more power.
Talk function
You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).
1
Press and hold the TALK button and talk clearly into the microphone from a distance of -
12in/1-0cm (Fig. 2).
The green LINK light starts flashing and the message 'Talk' appears on the display.
,
2
Release the TALK button when you have finished talking.
Sound level lights
The parent unit continuously monitors the sound level in your baby´s room and the sound level
lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on
the parent unit.
-
As long as the baby unit does not detect a sound, all sound level lights on the parent unit are
out.
-
When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.
The number of lights that go on is related to the loudness of the sound picked up by the baby
unit.
nightlight
1
Press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 2)
Q appears on the display of the parent unit.
,
2
Press the nightlight button Q again to switch off the nightlight.
The nightlight dims gradually before it goes out completely.
,
Q disappears from the display of the parent unit.
,
Tip: Switch off the nightlight when you operate the baby unit on non-rechargeable batteries. This saves
power.
Paging the parent unit
If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button
on the baby unit to locate the parent unit.
Note: The paging function only works when the parent unit is switched on.
1
Press the PAGE button on the baby unit (Fig. 27).
The message 'Paging' and the paging symbol appear on the displays of the baby unit
,
and parent unit.
The parent unit produces a paging alert tone.
,
EngliSh
1

Advertisement

loading