Download  Print this page

Installing Your Display Unit - Fujitsu e213 User Manual

Hide thumbs

Advertisement

Color profile: Disabled
Composite
Default screen

Installing your display unit

Before you start cabling your display unit, check that the
power is off on all units. To avoid any possibility of electric
shock, always connect your equipment to properly earthed
outlets.
1.
Place the display unit on a level and sturdy surface.
2.
Connect the display unit's signal cable (a) to the system unit, as
shown in Fig. 1, and secure it with the two screws. The
connector pins may be protected against damage by a plastic
cover. The cover needs to be removed first.
3.
Plug the display unit's power cable (b) first to the back of the
display unit.
4.
Then plug the power cable (b) to a 100V - 240V earthed
electrical outlet or to the system unit, if it has an outlet for the
display power cable.
Fig. 1
main2.chp
Fri Aug 08 12:43:37 1997
a
b
English
6
English print original
July 1997
Fujitsu e213
MNä

Advertisement

loading