Connecting Peripherals - LG 32UD99 Owner's Manual

Connecting Peripherals

USB Cable connection - PC
The USB port on the product functions as a USB hub.
Please connect the USB C-C or USB C-A cable to the
PC.
NOTE
Make sure to install the most recent Windows OS
y
service pack before using the product.
Peripheral devices are sold separately.
y
A keyboard, mouse, or USB device can be
y
connected to the USB port.
When Quick Charge is set to On and upstream cable is
y
not connected, data transmission through the USB1/2
port is not available. (e.g. connecting your keyboard,
mouse, or other USB storage devices to the monitor).
(Go to General > Quick Charge to set Quick
Charge to On or Off .)
The charging speed may vary depending on the
y
device.
(sold separately)
CAUTION
Cautions When Using a USB Device
A USB device with an automatic recognition
y
program installed, or that uses its own driver, may
not be recognized.
Some USB devices may not be supported or may
y
not work properly.
It is recommended to use a USB hub or hard disk
y
drive with power supplied. (If the power supply
is not adequate, the USB device may not be
recognized properly.)
If Quick Charge is off and the upstream Port is
y
not connected with Host PC, monitor may not
support 'Charge' .
Connecting to External Devices
Connecting Headphones
Connect peripherals to the monitor via the headphones
port. Connect as illustrated.
NOTE
Peripheral devices are sold separately.
y
If you use angled earphones, it may cause a prob-
y
lem with connecting another external device to
the monitor. Therefore, it is recommended to use
straight earphones.
Angled
Depending on the audio settings of the PC and
y
external device, headphones and speaker functions
may be limited.
19
(sold separately)
Straight