Toshiba D-R4SU Service Manual page 13

Dvd video recorder
Hide thumbs Also See for D-R4SU:
Table of Contents

Advertisement

1-2-5. Front (R), Front (L), Front (LED) and Front Jack PC Boards
1. Remove the front panel. (Refer to item 1-1-2.)
2. Peel off two tapes (1).
3. Remove four screws (2), then remove the stay (3).
4. Remove four screws (4) and two screws (5), then remove the Front (R) PC board (6) and Front (LED) PC board (7).
5. Remove two screws (8), then remove the Front Jack PC board (9).
6. Remove four screws (10), then remove the Front (L) PC board (11).
Note:
• After replacing, attach the tape (1) to its original position.
Front (L) PC board (11)
Front panel
Note:
• Fasten with the tape, taking care so that the wire does not hang over the tray door.
Front Jack
PC board (9)
Tapes (1)
Stay
Wire
Front (R) PC board
Screws (2)
Screws (8)
Screws (10)
Screws (5)
Front (LED)
PC Board (7)
Fig. 2-1-10
Front (LED)
Tray door
PC board
Fasten with the tape.
Fig. 2-1-11
Stay (3)
Screws (4)
Front (R) PC board (6)
Front (L) PC board
Front Jack
PC board

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

D-r4scD-kr4su

Table of Contents