Follow the standard engine starting
Do not operate the starter con-
tinuously for more than 5 sec-
onds or the starter will overheat
and the battery power will drop
Wait 15 seconds
between each operation of the
starter to let it cool and the bat-
tery power recover.
After the engine has started, discon-
nect the jumper cables. Disconnect
the negative (–) cable from the mo-
Install the removed parts.
Check that the side stand is up.
HOW TO RIDE THE MOTORCYCLE
Pull in the clutch lever.
Shift into 1st gear.
Open the throttle a little, and start to
let out the clutch lever very slowly.
As the clutch starts to engage, open
the throttle a little more, giving the en-
gine just enough fuel to keep it from
A. Shift Pedal