Formality Mode - Haier HG-Z1600 User Manual

4.10.1 Holding a conference call
Steps for sitting a call conference
Steps for sitting a call conference
When a call is connected, answer or call another;
After it is connected, select Conference from Menu and currently processing call and call on
hold are put together to form a conference. By same means you can add more conference
members.
If you need to converse with a certain member in a conference, you can select Split from Menu
(See the figure below), then all members in this session will be listed on the screen for you to
select to talk separately. Now the conference call is held nevertheless other members can
communicate with each other all the same. After your separate conversation, you can press OK
to return to the Call conference.
1.
4.10.2 Splitting members in a conference call
1. In a conference call, press LSK to select "Split "
2. Select a member(Name or phone number) from the choice column
3. Press LSK, select "Split" to split the selected one, then return to calling status
4. After splitting you can talk separately with the split one (Other members are held ), further more you can
hang up it then to set up a multi-party communication with others who are held at the time. You can also
choose not to hang it up after finishing the talk with that split one, but to press LSK to select "Add in" to
resume the original multi-party communication.

4.11 Formality mode

Long press "#" to enable or disable formality mode when the device is standby. Any sound will not be
played In formality mode.
14