PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE REFERENCE. PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED...
This accessory is shipped with all proper installation hardware and components. Make sure that none of these parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop the installation and contact Premier Mounts (800-368-9700). GB-PLEN1 (Qty 1)
The GB-PLEN1 is designed for use with either the PP-FCTA or PP-FCMA. After installing your selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1. GB-PLEN1 Installation with PP-FCTA Step 1. Loosen the wing nuts (do not remove) on the upper adapter plate.
Page 5
GB-PLEN1 You may wish to pre-install your electronic components inside the enclosure at this time. If so, make sure to leave the mounting slots accessible. M5 x 10mm Screws Installation Instructions Step 5. Locate the four (4) mounting holes on the mounting rails. Step 6.
If you did not pre-install electrical components, then you may now install all power and signal equipment. A qualified electrician should make any power connections to the GB-PLEN1. Completed Attachment Page 6 Padlock Hasp (optional) M5 x 10mm Screws Step 8. Place the padlock hasp on the inside of the GB-PLEN1 (optional).
GB-PLEN1 The GB-PLEN1 is designed for use with either the PP-FCMA or PP-FCTA. After installing your selected false-ceiling adapter, follow the instructions on the following pages to secure the GB-PLEN1. GB-PLEN1 Installation with PP-FCMA M5 x 10mm Screws Installation Instructions Step 1.
Page 8
If you did not pre-install electrical components, then you may now install all power and signal equipment. A qualified electrician should make any power connections to the GB-PLEN1. Completed Attachment Page 8 Padlock Hasp (optional) M5 x 10mm Screws Step 6. Place the padlock hasp on the inside of the GB-PLEN1 (optional).
What Premier Mounts Will Do At the sole option of Premier Mounts, Premier Mounts will repair or replace any product or product part that is defective. If Premier Mounts chooses to replace a defective product or part, a replacement product or part will be shipped to you at no charge, but you must pay any labor costs.
Need help?
Do you have a question about the GearBox Equipment Enclosure GB-PLEN1 and is the answer not in the manual?
Questions and answers