Download  Print this page

Specifications - Mitsubishi Electric JT-S2AP-S-NE Instruction Manual

Jet towel hand dryer
Hide thumbs

Advertisement

Model
Voltage
JT-S2AP-W-NE
Single-phase
JT-S2AP-S-NE
220 – 240V AC
JT-S2A-W-NE
※ The above are the fi gures when the air speed is set at "High".
※ JT-S2A does not have a heater.
■ Guide of air speed setting and drying time (model with heater)
Drying times guide ※
Settings
HIGH
(approx.) 9 – 12 seconds
Standard
(approx.) 14 – 16 seconds
※ Drying times are based on Mitsubishi measurements. (50mg of water per hand)
Working life of the motor/heater
The working life of the motor and heater is 7 years when used 120 times per day with the air speed set at "High".
The working life may be shortened if the unit is used in a location where the power supply voltage is high or when
the operation times per user are long.
No air blows as the motor dies.
(There may odors or noise when the motor dies, but this does not indicate a malfunction.)
The air becomes cold when the heater dies. Please contact the dealer for a replacement when the heater dies.
(subject to fees)
Specifi cations
Frequency
Heater
Power Input (W)
ON
880 – 980
50-60Hz
OFF
630 – 730
Noise
(approx.)
When drying quickly
60 – 62 dB
(approx.)
When keeping the noise level down during operation
58 – 59 dB
Current (A)
Weight (kg)
4.1 – 4.3
2.9 – 3.2
10
Dimensions (W × D × H)
4.5
250 × 160 × 290(mm)
4
250 × 162 × 292(mm)
Use

Advertisement

loading

This manual is also suitable for:

Jt-s2ap-w-neJt-s2a-w-ne