Table of Contents
Advertisement
Exposure
Settings
Full Aperture Metering
Full aperture metering can be performed with an FD lens
which has an aperture signal lever and pin.
I
Set the meter switch at " ON "
I
7 Set the shutter speed dial at the desired speed.
L
? Face the camera towards the subject, look
into the view'
t
finder, and check the position of the meter needle and
aperture needle.
r The meter needle is coupled to the film and shutter
speeds, and moves vertically according to the brightness
of the subject. The aperture needle, with a round circle,
is coupled to the preset aperture ring of the FD lens.
I
Turn the preset aperture ring and align the aperture
.l
needle with the meter needle.
r The green mark (circlel on the preset aperture ring is for
Servo EE Finder with Canon F-l use only.
r In the case of f/stop priority, turn the shutter speed
dial and align the meter needle with the aperture needle.
Be sure to set the shutter speed dial at the click-stopped
positions.
5 lf the aperture
needle
U needle by turning the
that the shutter speed is
20
does not align with the meter
preset aperture ring, it means
not properly set. In this case,
Hide quick links:
Advertisement
Table of Contents
