Dimensions Sizes 160, 180 - Bosch Rexroth A2FM series Instruction Manual

22 A2FM for explosive areas | Axial piston fixed motor

Dimensions sizes 160, 180

Dimensions sizes 160, 180
40 1)
10
37.2
Flange
ISO 3019‑2
▼ Splined shaft DIN 5480,
NG160, 180
A – W50×2×24×9g
36
12
44
55
Ports
A, B Working port (see subplates, page 23)
T Drain port
1
T Drain port
2
To shaft collar
1)
Center bore according to DIN 332 (thread according to DIN 13)
2)
For notes on tightening torques, see the instruction manual.
3)
Depending on the application, momentary pressure peaks may occur.
4)
Keep this in mind when selecting measuring devices and fittings.
Bosch Rexroth AG, RE 91001-01-X-B2/01.2016
158
T
1
T
25
2
72
▼ Splined shaft, DIN 5480,
NG160
Z – W45×2×21×9g
36
12
42
50
A
▼ Parallel keyed shaft, DIN 6885,
NG160, 180
B – AS14×9×70
36
Key width 14
12
90
Standard Size 3)
DIN 3852 6) M22 x 1.5; 14 deep
DIN 3852 6) M22 x 1.5; 14 deep
Depending on installation position, T
5)
(see also installation instructions on page 27).
The spot face can be deeper than as specified in the standard
6)
O = Must be connected (plugged on delivery)
7)
X = Plugged (in normal operation)
Dimensions [mm]
210
B
▼ Parallel keyed shaft, DIN 6885,
NG160
P – AS14×9×70
36
Key width 14
12
90
p [bar] State 7)
4)
max abs
450
3 X 5)
3 O 5)
or T must be connected
1 2