Table of Contents
Advertisement
CHAPTER -7: SWITCHING ON THE MACHINE AND SELECTING
A PROGRAMME
Programme Selection and Operating the Machine
1. Remaining Time Indicator
Remaining Time Indicator shows the duration of the programmes and the remaining time during the programme
flow. Besides, you can put off the programme delay time for 1-19 hours by pressing the keys on the indicator
before the programme is started. If you want to make any changes in the delay time, you can adjust it by pressing
the Start/Pause key and using "+" and "-" keys on the display. Press the Start/Pause key again to activate it. If the
user switches the programme selection button to off position after enabling the delay time and the programme has
started, the remaining delay time is stored and the programme resumes after the remaining delay time has pas-
sed upon selecting a new programme. To cancel the delay, you need to switch to 0 h by using the ''+ and -'' keys.
2. Door Handle
Use the door handle to open/close the door of your machine.
3. Half Load Button
Thanks to the half load function in your machine, you can shorten the durations of the programmes that you have
selected and reduce the energy and water consumption by using half load electricity and water (see programme
listing p 24)
Note: If you have used any extra function (such as the delay or half load) in the washing programme that you
last used and then cut off the energy of the machine and re-energised it, that function you have selected will not
be active in the next washing programme. If you would like to use this feature in the programme you have newly
selected, you may select the desired functions once again.
4. Start/Pause Key
When you press the Start/Pause key, the programme you have selected with the programme selection button will
start operating and the washing light will be on. After the programme has started, the Start/Pause light will go off.
In the Stop (Hold) position, the Start/Pause light blinks while the washing light is lit.
5. On/Off Programme Selection Button
It cuts off the energy of the machine when in off position In other positions, the machine is energised and prog-
ramme selection can be performed. 6 Salt Missing Warning Indicator
Check the salt missing warning indicator light on the display to have an idea whether the softening salt in your
machine is enough. When salt missing warning indicator is lit, fill the salt compartment.
7. Rinse Aid Missing Warning Indicator
Check the rinse aid missing warning indicator light on the display to have an idea whether the amount of the
rinse aid in your machine is enough. When rinse aid missing warning indicator is lit, fill the rinse aid compartment.
8. Programme Monitoring Lights
You can monitor the programme flow with the programme lights on the control panel.
•
Wash
•
Rinse
•
Dry
•
End
•
Using the Child Lock
Press + and - keys on the remaining time indicator at the same time for 3 seconds so as to activate the child lock.
At that time, on the remaining time indicator, "CL" is displayed for 2 seconds. To deactivate the function, Press +
and - keys again at the same time for 3 seconds. "CL" will blink for two seconds.
8
EN-20
Hide quick links:
Advertisement
Table of Contents
