Table of Contents
Advertisement
Linking And Unlinking The Remote Keyless Entry Transmitter To Memory
Your RKE transmitters can be programmed to recall one of two pre-programmed memory
profiles by pushing the UNLOCK button on the RKE transmitter.
NOTE:
Before programming your RKE transmitters you must select the "Memory To FOB" feature
through the Uconnect system screen. Refer to "Uconnect Settings " in "Understanding
Your Instrument Panel" in the Owners Manual on the DVD for further information.
To program your RKE transmitters, perform the following:
1. Cycle the vehicles ignition to the OFF position.
2. Select a desired memory profile (1) or (2).
NOTE:
If a memory profile has not already been set, refer to "Programming The Memory Feature"
in this section for instructions on how to set a memory profile.
3. Once the profile has been recalled, push and release the SET (S) button on the
memory switch.
4. Within five seconds, push and release button (1) or (2) accordingly. "Memory Profile
Set" (1 or 2) will display in the instrument cluster.
5. Push and release the LOCK button on the RKE transmitter within 10 seconds.
NOTE:
Your RKE transmitters can be unlinked to your memory settings by pushing the SET (S)
button, and within 10 seconds, followed by pushing the UNLOCK button on the RKE
transmitter.
Memory Position Recall
NOTE:
The vehicle must be in PARK to recall memory positions. If a recall is attempted when the
vehicle is not in PARK, a message will be displayed in the Driver Information Display
(DID).
Driver One Memory Position Recall
• To recall the memory settings for driver one using the memory switch, push MEMORY
button number 1 on the memory switch.
• To recall the memory settings for driver one using the RKE transmitter, push the
UNLOCK button on the RKE transmitter linked to memory position 1.
Driver Two Memory Position Recall
• To recall the memory setting for driver two using the memory switch, push MEMORY
button number 2 on the memory switch.
• To recall the memory settings for driver two using the RKE transmitter, push the
UNLOCK button on the RKE transmitter linked to memory position 2.
G E T T I N G S T A R T E D
33
Advertisement
Table of Contents
