Naming Preset Stations and
Program Sources
You can enter a name (index name) of up to 8 characters
for pr eset stations and pr
ogram sour ces. These names (for
example, “VHS”) appear in the r
eceiver ’s display when a
station or pr ogram sour ce is selected.
Note that no mor
e than one name can be enter
ed for each
preset station or pr
ogram sour ce.
This function is useful for distinguishing components of
the same kind. For example, two VCRs can be specified as
“VHS” and “8MM”, r
espectively . It is also handy for
identifying components connected to jacks meant for
another type of component, for example, a second CD
player connected to the MD/T
APE jacks.
1
To name a preset station
Press TUNER.
The last station you r
eceived is tuned in.
To name a program source
Select the program source (component) to be
named, then go to Step 3.
2
Tune in the preset station you want to create an
index name for.
If you ar e not familiar with how to tune in pr
eset
stations, see “T
uning to pr eset stations” on page 37.
3
Press NAME.
4
Create an index name by using the MENU +/– and
MENU
/
:
Press MENU +/– to select a character
, then pr ess
to
move the cursor to the next position.
To insert a space
Press MENU +/- until a blank space appears in the
]
display (you can find the space character between “
”
and “A”).
If you’ve made a mistake
Press MENU
or
repeatedly until the character to
be changed flashes, then pr
ess MENU + or – to select
the right character
.
5
Press ENTER.
To assign index names to other stations
Repeat Steps 2 to 5.