Features And Specifications - Lenovo Flex System EN2092 Product Manual

1gb ethernet scalable switch
Hide thumbs Also See for Flex System EN2092:
Table of Contents

Advertisement

Simplified management
A key challenge is the management of a discrete network environment. The EN2092 1Gb Scalable
Switch supports a command-line interface (CLI) for integration into existing scripting and automation.
Network management can be simplified by using port profiles, topology views, and virtualization
management.
For more advanced levels of management and control, which can significantly reduce deployment
and day-to-day maintenance times, while providing in-depth visibility into the network performance
and operations of Lenovo switches. Plus, when leveraging tools like VMware vCenter Server or
vSphere, or Switch Center provides additional integration for better optimization.

Features and specifications

Note: Features and specifications listed in this section are based on Networking OS 7.8.
The EN2092 Scalable Switch has the following features and specifications:
Internal ports
Twenty-eight internal full-duplex Gigabit ports
Two internal full-duplex 1 GbE ports connected to the chassis management module
External ports
Four ports for 1 Gb or 10 Gb Ethernet SFP/SFP+ transceivers (support for 1000BASE-SX,
1000BASE-LX, 1000BASE-T, 10GBASE-SR, or 10GBASE-LR) or SFP+ direct-attach copper
(DAC) cables. SFP+ modules or DAC cables are not included and must be purchased separately.
Twenty external 10/100/1000 1000BASE-T Gigabit Ethernet ports with RJ-45 connectors
One RS-232 serial port (mini-USB connector) that provides an additional means to configure the
switch module
Scalability and performance
Fixed-speed external 10 Gb Ethernet ports for maximum external bandwidth
Autosensing 10/1000/1000 external Gigabit Ethernet ports for bandwidth optimization
Non-blocking architecture with wire-speed forwarding of traffic
Media access control (MAC) address learning: automatic update, support of up to 32,000 MAC
addresses
Up to 128 IP interfaces per switch
Static and LACP (IEEE 802.3ad) link aggregation, up to 60 Gb of total external bandwidth per
switch, up to 64 trunk groups, up to 16 ports per group
Support for jumbo frames (up to 9,216 bytes)
Broadcast/multicast storm control
IGMP snooping for limit flooding of IP multicast traffic
IGMP filtering to control multicast traffic for hosts participating in multicast groups
Configurable traffic distribution schemes over trunk links based on source/destination IP or MAC
addresses or both
Fast port forwarding and fast uplink convergence for rapid STP convergence
Flex System EN2092 1Gb Ethernet Scalable Switch
7

Advertisement

Table of Contents
loading

Table of Contents