Installation Instructions; Installation External To Breaker Panel - Neurio W1-S User Manual

Find Quality Products Online at:
4. The Neurio Sensor must not be exposed to moisture, direct sunlight, extremely low or high
temperatures, and conductive pollution. Consult section 2.5 for the Neurio Sensor's acceptable
operating environment.
5. The Neurio Sensor must be installed in a location that limits access to only qualified personnel.

2.2 Installation Instructions

Note that different installation instructions are provided for split-phase, three-phase and solar systems. If
your Neurio Sensor came with an Expansion Kit for 3-phase or solar, follow the instructions provided in the
kit. Otherwise, follow the Installation Guide included in the Neurio Sensor box. These instructions are also
available at support.neur.io.
2.3 Configuring the Neurio Sensor and Creating an Account
Instructions for configuring the Neurio Sensor are included in the Welcome Guide or at support.neur.io.
Once that's complete, you can create your account by going to my.neur.io.

2.4 Installation External to Breaker Panel

If there is insufficient room to install the Neurio Sensor within the breaker panel, it can be installed
externally inside an approved metallic enclosure with equivalent characteristics to a breaker panel. Follow
the procedure for installation internal to the circuit breaker panel, but install the Neurio Sensor inside the
secondary enclosure, and the CTs in your main breaker panel. Ensure that the connection made between
the secondary enclosure and your breaker panel conforms to the electrical code for your r egion.
GlobalTestSupply
www.
8
.com
sales@GlobalTestSupply.com