AT212 Powered MicroMain Owner’s Manual TABLE OF CONTENTS Overview..................Technical Specifications............Photos..................Setup Instructions..............Troubleshooting................ Safety Information..............Warranty..................FCC Compliance Notice............. Need more assistance? Support is available via phone or email. Email: support@bassbo ss.com Phone: 855-822-7770 toll free or 512-368-3268...
AT212 make it ideal for providers who want to deliver high output but prefer not to move heavy cabinets. BASSBOSS cabinets are hand-built in the USA. The cabinet is built from Intended for use with a subwoofer system to complete a 3-way active full- 18 and 15mm Baltic Birch plywood.
For use when flying cabinets horizontally Shoulder Eye Bolts: For use when flying cabinets vertically Covers: Heavy-duty padded nylon transport covers Weatherized Version: Suitable for permanent outdoor installations Online Information: bassboss.com/powered-top-at212 Our proactive philosophy causes specifications to be subject to change whenever improvements are made.
System Setup Addendum: When connecting multiple BASSBOSS loudspeakers in a system, signal can be passed through from one powered loudspeaker to another using balanced, shielded XLR cables. No processing is applied to the signal as it passes through from the input to the output connectors in each loudspeaker. Signal can be routed in any sequence because each loudspeaker receives a full-range signal and applies the necessary processing in order to operate as part of the overall system.
Contact your dealer or BASSBOSS support if the product is not functioning properly. BASSBOSS strongly recommends this product be installed by a qualified, professional installer who can ensure correct installation and certify that it is installed in compliance with the regulations in force.
BASSBOSS personnel. This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility. Purchaser is responsible for all costs of shipping and handling.
Need help?
Do you have a question about the AT212 Powered MicroMain and is the answer not in the manual?
Questions and answers