Advertisement
Quick Links
Advertisement
Summary of Contents for VECTOR WELDING TECHNOLOGY AC/DC VW 240 Puls
- Page 1 OPERATION MANUAL AC/DC VW 240 Puls...
- Page 2 Warnings! Item description VECTOR AC/DC VW240 During the cutting and welding operation you will probably face with the following major 4 in 1 Combine welding device: risks. Please read these instructions carefully before using the mamchine. 1. TIG welder with 200 amp Safety Warning! 2.
- Page 3 Precision metering with TIG pulse function On the 2nd knob on the top row from left, set the correct current for the welding task. It is continuously adjustable up to 200 A. The chosen welding current is dependent on the strength of the material, welded workpiece, the The increased arc stability provides better welding precision.
- Page 4 The third knob on the bottom row, the power shift is only in alternating current operation AC Correctly used, the pulse function improves the quality of the weld, by better melting of significant. In the processing of aluminum is welded with alternating current. the weld metal and still a lower overall current.
- Page 5 ALL SIGNIFICANT WELDING PARAMETERS IN DIRECT ACCESS Adjustable via rotary switches welding parameters TIG-welding: • Adjustable welding current: adjustable from 0 to 200 A. Works with a TIG torch in which is inserted a tungsten electrode and argon shielding gas. Additional- •...
- Page 6 Bedienfeldbeschreibung VECTOR AC/DC VW240 1. Connection for electrode holder 3. Power connector for cable assembly 2. Gas connection for hose assembly 4. Connection for ground wire 1. Digitalanzeige Ampere 11. Impulsweite 2. LED bei Inbetriebnahme 12. Impulsfrequenz 3. LED bei Überhitzung 13.
- Page 7 ZUSAMMENSETZUNG WIG-BRENNER COMMISSIONING MMA WELDING 1. Important: switch toggle to MMA welding. Before switching on the device connect the ground clamp and electrode holder. 1 = Collet housing 2. Plug the power cable to a one with 230 V and 16 ampere protection socket. 2 = Clamping sleeve (Important: use only a separate line for this.) 3 = Gas nozzle...
- Page 8 Technical datas Welding parameters- valid for all TIG devices Baureihe AC DC VW240 Sheet thickness Tungsten electrode Addition stick diameter Gas nozzle No.. (mm) diameter (mm) (mm) Power Vol. AC 230 V Frequency 50/60 Hz 4 bis 6 Output current 200 A Display of he output current: 6 bis 8...
- Page 9 VECTOR WELDING TECHNOLOGY GmbH Hansestraße 101 51149 Köln www.vector-welding.com info@vector-welding.com Tel. +49 (0) 2203 / 571015 0...
Need help?
Do you have a question about the AC/DC VW 240 Puls and is the answer not in the manual?
Questions and answers