Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Livall BH
Summary of Contents for Livall BH
- Page 1 BH&MT BH + MT Series Quick Start Guide www.livall.com...
- Page 2 .Introduction Thank you for choosing the LIVALL Smart Helmet. This Guide will instruct you on how to use this product. LIVALL follows the strategy of sustainable development. This Manual will be updated from time to time. If you need more detailed instructions, please see the "Important Information and Warranty Card"...
-
Page 3: Packing List
II. Packing List Helmet x 1 Product tag x 1 Quick Start Guide x 1 Bling remote controller x 1 USB charging cable x 1 Important Information and Warranty Card x 1 III. Wearing Instructions Incorrect Incorrect Correct... - Page 4 Adjust the length of the Leave a gap as thick chinstrap as one finger Correctly position the Check whether the buckle is helmet properly fastened...
- Page 5 IV. Operating Instructions (Please charge the battery before use.) Start-Up " □ " function button POWER ON Orange light Press the " □ " button for You will hear a voice saying The orange tail light will blink 3-to-5 seconds "POWER ON".
- Page 6 Connecting for the first time or switching devices One helmet can be connected to up to three LIVALL-authorized devices at the same time. After the handlebar remote control is connected, press the "left" or "right" button to control the helmet’s corresponding indicator light.
- Page 7 Connect to the phone (Tip: Once connected, it can control the music player as well as make and receive calls. To ensure the stability of the connection, please try to position your mobile phone in front of you.) "Click to connect"...
- Page 8 Connect LIVALL Riding phone App (for use the Walkie-Talkie function and take photos) For Android: Start LIVALL Riding. The App For IOS: Follow LIVALL Riding guide to connect will automatically connect to the helmet; to the helmet. After the connection is completed, select a contact in the App and press the Walkie-Talkie button on the handlebar remote control to speak to the contact;...
- Page 9 Charging 0.5A 3 HRS USB port Red light To charge Charging time Charging complete Plug the USB charging cable into It is recommended that the power When the charging indicator light the USB port on the helmet. The of the charger is no less than 0.5A. turns off, it indicates that charging tail charging light is illuminated in Charging time takes about 3hours.
-
Page 10: Technical Specifications
The max. battery life of the light is 10 hours. Listening time for music is 3-to-6 hours. Standby duration: Max. 180 days Temperature : Temperature for use: 0°C~40°C. Temperature for storage: -20~60°C LIVALL's website : www.livall.com Instruction version : V2.1 ENQ Performance standards: •... - Page 12 Designed and Manufactured in Shenzhen, China 345-BH60SE-A0EN...
- Page 13 Important Information and Warranty Card www.livall.com...
- Page 14 LIVALL adheres to a strategy of sustainable development. This Manual (i.e., the Important Information and Warranty Card) will be updated from time to time, therefore, LIVALL reserves the right to make changes and improvements to any of the products described herein. The content of the Instructions shall be provided subject to the status of the products being manufactured.
-
Page 15: Safety Precautions
II.Safety Precautions Please read the following simple guidelines. Failure to comply with these guidelines may be dangerous or break the law. Keep the product out of reach of children and pets: Keep the product and all components out of reach of children and pets. Children and pets may swallow small parts, which may cause choking or other dangers. - Page 16 Comply with all related regulations and do not use this product in areas where blasting is in progress. Accessories and batteries: Use only our approved accessories and batteries as other accessories and batteries may damage the product and be dangerous. Connecting to other devices: When connecting the product to other devices, read the instructions of the other device for detailed safety instructions.
- Page 17 overheating, explosion or fire. It is strictly prohibited to disassemble, crush, heat or burn built-in batteries; sharp objects, screwdrivers, etc. are forbidden from piercing or prying open the batteries. These actions may cause the battery to ignite or burn. If a battery's electrolyte gets into your eyes, there is a risk of blindness. If the electrolyte is accidentally splashed into your eyes, do not rub your eyes.
-
Page 18: Other Important Safety Information
Please try to avoid using in the rain so as to prevent damaging the functions. VI.Other Important Safety Information For your safety, please use original accessories approved by LIVALL. Accessories can be purchased from local distributors authorized by LIVALL. -
Page 19: Products And Accessories
Do not charge the helmet continuously for more than 12 hours. Unqualified persons must not disassemble this product, its batteries or other accessories. In case of any malfunction in the product, its batteries or accessories, please contact LIVALL’s local sales center. -
Page 20: Environmental Protection Information
VIII.Environmental Protection Information Table of Toxic or Hazardous Substances, Elements and Contents. Environmental Protection Use Period of the Parts: Product – 3 years; battery – 5 years; accessories – 10 years The Environmental Protection Use Period marked on this product indicates the safe period of use for the product under conditions of use specified in this Manual without toxic or hazardous substance leakage. - Page 21 LIVALL; or any product beyond warranty period; LIVALL will provide maintenance and repair services and charge an appropriate fee accordingly.
-
Page 22: Warranty Details
The warranty time is 1 year after purchase. Any quality problem can be maintained for free or it can be replaced within 30 days after purchase if re-sale is available. LIVALL bears no responsibility for warranty over other product components. i.e, the Quick Start Guide, Warranty Card, etc. - Page 23 NOTE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
- Page 24 WARNING This helmet is intended for use for biking, skateboarding, inline skating. Not for motor vehicle use. The helmet is intended to reduce the risk of injuries to the head when an accident happens but it cannot protect against every kind of injuries. Do not make any changes to the helmet that might impair its protective capacity.
- Page 25 INSTRUCTIONS FOR USE AND CARE A. No Helmet can protect the wearer against all possible impacts. B. The Helmet is designed to be restrained by a strap under the lower jaw. C. To be effective, a Helmet must fit and be worn correctly. To check for correct fit, place helmet on head and make any adjustments indicated.
- Page 26 Administrative Regulations on Low Power Radio Waves Radiated Devices warning Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices.
- Page 27 LIVALL Warranty Card To Be Completed Upon Purchase Product model ________________ Related accessories ______________________ Bar code of product ________________ Bar code of accessories ______________________ Distributor's name (with seal upon purchase) ________________________________________ Purchase date ________________ Other info. _______________________________ Below Is To Be Completed By Customer Customer name Tel.
- Page 28 Shenzhen, China Notified Body: ITS Testing Services (UK) Ltd., Centre Court, Meridian Business Park, Leicester LE19 1WD No. 0362 Original design manufacturer: Shenzhen Qianhai LIVALL IoT Technology Co., Ltd. Address: 904, R&D Building Tsinghua Hi-Tech Park, NanShan, Shenzhen, China Postal code:...
Need help?
Do you have a question about the BH and is the answer not in the manual?
Questions and answers