Download  Print this page

Powermate PM4025 Specification Sheet

Gaseous fueled stationary standby backup power system
Hide thumbs
   

Advertisement

Page 1 of 4
PM4025
Gaseous Fueled Stationary Standby
Standard Features
Standard Features
Standard Features
Standard Features
Ford Industrial Engine
• Ford Model LRG425 4-Cylinder In-Line Engine
• Electronic, Distributorless Ignition Control Module
• Electronic Governing Provides 0.5% Frequency Control
• Engine Oil Drain Lines Provided
• Easily Accessible For Engine Service
Alternator
• 2/3 Pitch Winding For Reduced Harmonics
• Low Waveform Distortion
• Excellent Motor Starting
• Tropicallized Windings
Weather Enclosure
• 16 Gauge Steel Enclosure With Sound Material Installed
• Powder Painted Almond Color Finish
• Lockable (keyed alike) Doors With Sound Baffles
• Vertical Air Discharge For Optimal Sound Control
• Critical Grade Muffler Integral To Enclosure
• No Exterior Fasteners
Fuel System
• Operates On Liquefied Petroleum Gas Or Natural Gas
• Simple Field Conversion Between Fuels
• Integrated Governor- Throttle Body Assembly
Cooling System
• Rated To Operate In 104°F Ambient Temperatures
• Factory Filled With Environmentally Safe Propylene Glycol
• 500-Watt Thermostatically Controlled Circulation Heater Aids Starting
Main Line Circuit Breaker
• UL 489 Listed Breaker Is Included As Standard
• Conveniently Mounted Behind Lockable Door With Window
Digital Remote Start/Stop Controller
• Robust Control Package
• Highly Accurate Monitoring, Display & Protection
• Field Programmable To Custom Tailor For Users Needs
• Equipped With RS485 Output, Compatible With RDP110 Remote
Annunciator Panel
• Programable I/O's- 2 Relay Output/3 Auxiliary Input Contacts
3-Year/1500 Hour Warranty
• Best Standard Warranty In Its' Class
(1)
Rated @ 30% Voltage Dip
(2)
Consult Factory for conformance to UL2200 on special models prior to ordering.
* Standby Power Rating Definition: All models rated on lp gas, derate 10% when using natural gas. Capable of supplying emergency power in lieu of utility power for the duration of the interruption.
There is no overload capacity available or specified for this rating. Single-phase units are rated at unity power factor. Three-phase units are rated at .8 power factor. Single-phase systems are dedicated single
phase (4-wire). Three-phase systems are 12-lead broad range reconnectable. When reconnecting a 12-lead alternator to single-phase, derate to 2/3 output. OTHER DERATION FACTORS: Engine power is
available to 77°F, barometric pressure of 29.5in. Hg & relative humidity of 60%. Altitude: Derate system performance 4% per 1000 feet above 500 feet. Temperature: Derate system performance 1% per 10°F
temperature increase above 77°F. Humidity: Derate system performance 1.5% per 10% relative humidity above 60%. For elevations above 8000 feet, consult factory.
All Specifications Subject to Change Without Notice
25kW
60Hz
Model: PM4025
Voltage
Phase
120/240
1
120/208
3
120/240
3
277/480
3
Listed To The UL2200 Standard
Propane
Standby Rating*
Full Load
Hertz
kW
kVA
Amps
60
25
25
104
60
25
31.5
86.7
60
25
31.5
75.2
60
25
31.5
37.5
Coleman® is a registered trademark of the Coleman Company, Inc. used under license.
Motor
MLCB
Starting
Insulation
Rating
(1)
SkVA
Class
Amps
43.5
H
110
53
H
100
66
H
90
66
H
45
(2)
©2002 Coleman Powermate, Inc.

Advertisement

Table of Contents
loading

  Related Manuals for Powermate PM4025

No related manuals

  Summary of Contents for Powermate PM4025

  • Page 1 Listed To The UL2200 Standard Coleman® is a registered trademark of the Coleman Company, Inc. used under license. Motor MLCB Full Load Starting Insulation Rating Amps SkVA Class 43.5 31.5 86.7 31.5 75.2 31.5 37.5 ©2002 Coleman Powermate, Inc. Amps...
  • Page 2: Engine Data

    Absorption - 5.5A, Taper To 1.5A Between 13-14.4vdc Float – 0.1 To 0.3A, 13.3vdc Κ 0.3vdc Consult Factory Consult Factory Consult Factory Consult Factory Consult Factory Consult Factory Coleman® is a registered trademark of the Coleman Company, Inc. used under license. ©2002 Coleman Powermate, Inc.
  • Page 3: Fuel System

    LP Gas (Cubic Feet/Hour) 4200 CFM 250 CFM 100 CFM 4550 CFM 70000 BTU/HR 195000 BTU/HR 206 CFM 1.1 PSI 1200 °F Coleman® is a registered trademark of the Coleman Company, Inc. used under license. Natural Gas (Cubic Feet/Hour) ©2002 Coleman Powermate, Inc.
  • Page 4: Control Panel Functions

    Coleman® is a registered trademark of the Coleman Company, Inc. used under license. • Generator Frequency Metering • Engine Coolant Temperature Protection • Overspeed Protection • Engine Cooldown • Engine RPM Metering • Engine Run Time Metering • Maintenance Interval Timer • Battery Charger Failure Monitoring* ©2002 Coleman Powermate, Inc.