Troubleshooting - Kenmore 721.81622 Use & Care Manual

TROUBLESHOOTING

TURNTABLE
PROBLEM
The turntable will not turn.
AUDIBLE SIGNALS
PROBLEM
You do not hear
the programming or
end-of-cycle beep.
DISPLAY MESSAGES
PROBLEM
The display is flashing " : ".
If none of these items are causing your problem, call Sears Service at 1-800-4-MY-HOME
36
CAUSE
• The turntable is not correctly in place. It should be correct-side up and sitting
firmly on the center hub.
• The support is not positioned correctly. Remove the turntable and restart the
oven. If the hub still does not move, call Sears Service at 1-800-4-MY-HOME
Cooking without the turntable will cause poor results.
CAUSE
• You have not entered the correct command.
CAUSE
• There has been a power interruption. Reset the clock. (See the "Clock" section
on page 13.)
.
®
® .