Connection Settings - Nokia E72 User Manual

To set the device to indicate when it is used in a microcellular
network (MCN), select Cell info display > On.

Connection settings

Select Menu Ctrl. panel Settings and Connection.
> >
Select from the following:
Bluetooth — Edit the Bluetooth settings.
•
USB — Edit the data cable settings.
•
Destinations — Set up new or edit existing access points.
•
Some or all access points may be preset for your device by
your service provider, and you may not be able to create,
edit, or remove them.
VPN — Manage the settings for virtual private
•
networking.
Packet data — Define when packet data network is
•
attached, and enter the default packet switched access
point name if you use your device as a modem for a
computer.
XDM settings — Create an XDM profile. The XDM profile is
•
required for many communications applications, for
example, presence.
Presence — Edit the settings for presence (network
•
service). To register for the service, contact your service
provider.
Remote drives — Connect the device to a remote drive.
•
Configurations — View and delete trusted servers from
•
which your device may receive configuration settings.
Cyan Cyan
2009-06-25 13:16:47 P3657 user guide publication 3
Access points
Create a new access point
Select Menu Ctrl. panel
>
Destinations.
You may receive access point settings in a message from a
service provider. Some or all access points may be preset for
your device by your service provider, and you may not be able
to change, create, edit, or remove them.
When you select one of the access point groups (
, ), you can see the access point types:
indicates a protected access point
indicates a packet data access point
To create a new access point, select
device asks to check for available connections. After the
search, connections that are already available are displayed
and can be shared by a new access point. If you skip this step,
you are asked to select a connection method and to define
the settings needed.
To edit the settings of an access point, select one of the access
point groups, scroll to an access point, and select Edit. Use
the instructions provided by your service provider to edit the
following:
Connection name
•
Data bearer — Select the data connection type.
•
Depending on the data connection you select, only certain
setting fields are available. Fill in all fields marked with
be defined or with a red *. Other fields can be left empty,
unless your service provider has instructed otherwise.
Magenta Magenta Yellow Yellow Black Black
Settings and Connection
> >
, , ,
Access point. The
— Enter a name for the connection.
Must