Advertisement
Function Controller Installation
The function controller is an additional controller which is used with the centralized controller.
Accessories
Function
Cable-tie (2)
controller (1)
4
E-
Cable clamp
M4x16 tapped
(6)
screw (7)
Function Controller Installation
1
Disassemble the function controller by using a groove
on its top.
2
Secure the rear cover of the function controller on the
wall with two screws.
3
Connect the C1 and C2 terminals in the function
controller to the same terminals in the centralized
controller.
Owner's
Installation
instructions (1)
manual (1)
Advertisement
