Advertisement
CUSTOMER RESPONSIBILITIES
MAINTENANCE
SCHEDULE
..1__e//,o
_'o _ /_o_ _/_*
'*"
,. OA B
AS YOU COMPLETE
./'_,
"_/_,c_O_
REGULARSERVICE
/_(_'_ERVICE
DATES
Check Operator
Presence and
T
Interlock Systems
_V'
Check for Loose Fasteners
_s
Shmp_dReplace
Mower Blades
Lubrication Chart
If
T
Check Battery Leve_
R
Clean Battery and Terminals
I_
Check Transaxle
Cooling
V'
Check V-Belts
I_
Check Engine Oil Level
if
I_
Change Engine Oil (with oil filter)
t_t2
If
E
Change Engine Oil (without oil filter) •
I_1._
V'
N
Clean Air Filter
li/2
G
Clean Air Screen
V'2
Muffler/Spark
Arrester
ll_
Inspect
E
Replace Oil Filter (If equipped)
1_,21
Clean Engine Cooling Fins
I_,
Replace Spark Plug
1_2
ll_
Replace Air Filter Paper Cartridge
Replace Fuel Filter
1 - Change more often when operating under a heavy load or
in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL
RECOMMENDATIONS
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free batteP/.
5 - Tighten front axle pivot bo_tto 35 ft.-Ibs, maximum.
Do not overtightan.
LUBRICATION
CHART
The warranty on this tractor does not cover items that have
ZERK
been subjected to operator abuse or negligence. To receive
full value from the warranty, operator must maintain tractor
(_FRONT
as instructed in this manual.
BEARING ZERK
Some adjustments will need to be made periodically to
properly maintain yourtractor.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each season.
•
Once a year you should replace the spark plug,clean or
replace airfilter, and check blades and belts forwear. A
new spark plug and clean airfilter assure proper air-fuel
mixture and help yourengine run betterand last longer.
ZERK
.(I)FRONT WHEEL
BEARING ZERK
BEFORE
EACH
USE
•
Check engine oil level.
•
Check brake operation.
•
Check tire pressure.
•
Check operator presenoe and
interlock systems for proper operation.
•
Check for loose fasteners.
(_GENERAL
PURPOSE
GREASE
(_REFER
TO CUSTOMER
RESPONSIBILITIES
"ENGINE"
SECTION
IMPORTANT:
DO NOT OIL OR GREASE THE PIVOT POINTS
WHICH HAVE SPECIAL NYLON BEARINGS. VISCOUS LUBRI-
CANTS WILL ATTRACT DUST AND DIRT THAT WILL SHORTEN
THE LIFE OF THE SELF-LUBRICATING BEARINGS.
IF YOU
FEEL THEY MUST BE LUBRICATED, USE ONLY A DRY, POW-
DERED GRAPHITE TYPE LUBRICANT SPARINGLY.
14
Advertisement
