Panasonic KX-TG8231 Operating Instructions Manual page 6

Expandable digital cordless answering system with 2 handsets
Hide thumbs Also See for KX-TG8231:
Table of Contents

Advertisement

Temporary Confidential
TG823X_Shinsei.book Page 6 Monday, April 23, 2007 6:03 PM
Connections
Base unit
Connect the telephone line cord until it
clicks into the base unit and telephone
line jack (A). Connect the AC adaptor
cord (B) by pressing the plug firmly
(C).
L Use only the supplied Panasonic AC
adaptor PQLV207.
C
Hook
A
B
(120 V AC, 60 Hz)
To single-line telephone
jack (RJ11C)
Note:
L The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the
adaptor may cause it to become
disconnected.
L The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same
telephone line or to the same
telephone line jack using a Panasonic
T-adaptor (page 4).
6
For assistance, please visit http://www.panasonic.com/help
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the
telephone line jack in the event of the
following:
– Noise is heard during conversations.
– Caller ID features do not function
properly.
To single-line
telephone
jack (RJ11C)
Noise filter
Charger (KX-TG8232)
L Use only the supplied Panasonic AC
adaptor PQLV209.
Hooks
(120 V AC, 60 Hz)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kx-tg8232

Table of Contents