Connecting Process - Bosch Plug AA Instruction Manual

▶ Do not connect any appliances
which could cause fire or other
damage if switched on inadvertently
(e.g. irons).
26
▶ Do not use plugs to disconnect appli-
ances from the mains. The load is not
galvanically isolated from the mains.
▶ Devices with electronic power supply
units (e.g. TV or high voltage LED light
sources) are no ohmic loads. They
can generate inrush currents with
more than 100 A. Switching such kind
of loads may lead to premature wear
of the actuator. In consequence the
reliable switching off of the connected
device is not guaranteed anymore.

6.2 Connecting process

Insert the plug into the socket.
The plug is now ready to use.
You can now plug in the required
electrical appliance.
27