Maintenance And Cleaning; Electrical Schematic Diagram - NewAir AI-250W Owner's Manual

4. The ice maker automatically stops working when the ice basket is full. The "ICE
FULL" indicator will lit when the ice bucket is full. To restart ice making, please
remove the ice and then press "ON/OFF".
5. Change the water in the water reservoir every twenty- four hours to ensure a
reasonable hygiene level. If the unit is not in use for a few days, drain all the
water in the tank reservoir and refill before operating again.
6. Minimum water level is 1.5" and the max water level is 3". The "ADD WATER"
indicator will lit when the water level is low. To restart, please add water and then
press "ON/OFF" button.

MAINTENANCE AND CLEANING

Before using your ice maker, it is strongly recommended that you clean it thoroughly.
1. Remove the ice basket.
2. Turn the drain cap to drain out the water.
3. Clean the interior with diluted detergent, warm water, and a soft cloth.
4. The outside of the ice maker should be cleaned regularly with a diluted detergent
and warm water.
5. Dry the interior and exterior with a soft cloth.
6. Close the drain cap.
7. When the machine is not in use, open the drain cap to drain water completely
from the water reservoir.

ELECTRICAL SCHEMATIC DIAGRAM

9
A Name You Can Trust