Low Cut Filter (Mic Terminal); Audio Mix - Canon VIXIA HF G21 Instruction Manual

Recording Audio

Low Cut Filter (MIC Terminal)

When you are recording using a microphone connected to the MIC terminal, you can activate the low
cut filter to reduce the sound of blowing wind, a car's engine and similar ambient sounds.
Operating modes:
1 Open the [MIC Low Cut] screen.
[FUNC.] [MENU]
>
76
2 Touch [i On] and then touch [X].
NOTES
• When recording in surroundings unaffected by wind or if you want to record low-frequency sounds,
we recommend setting [MIC Low Cut] to [j Off].

Audio Mix

When recording, you can mix audio from the built-in microphone with external audio from the MIC
terminal and adjust the mix balance for original sound effects. The external audio input can be from a
commercially available external microphone or from an external audio player (analog Line In).
Operating modes:
1 Connect the external audio source to the MIC terminal.
2 Open the [MIC Terminal Input] screen.
[FUNC.] [MENU]
>
3 Touch [Þ External Audio] or [ß Microphone] and then touch [K].
4 Activate the audio mix.
[Audio Mix]
>
5 Adjust the audio mix balance as necessary.
• Touch [INT] (more of the sound from the built-in microphone) or [EXT] (more of the sound from the
external audio) or drag your finger along the audio mix bar to adjust the mix balance as desired.
6 Touch [X] to set the audio mix and close the menu.
[MIC Low Cut]
> p >
[MIC Terminal Input]
> p >
[i On]