Connecting To Your Tv; Using An Optical Cable - LG SPJ9B-W Owner's Manual

12 Connecting
,
Note
y It takes a few seconds (and may take longer)
for the main unit and the subwoofer to
communicate with each other and make
sounds.
y The closer the main unit and the subwoofer,
the better sound quality. It is recommended
to install the main unit and the subwoofer as
close as possible and avoid the cases below.
2
- There is an obstacle between the main unit
and the subwoofer.
- There is a device using same frequency
with this wireless connection such as
a medical equipment, a microwave or a
wireless LAN device.
- Keep the sound bar and the subwoofer
away from the device (ex. wireless router,
microwave oven, etc.) over 1 m to prevent
wireless interference.
> 1 m

Connecting to your TV

Please connect with this unit and TV using the optical
digital cable or HDMI cable considering the state of
the TV.

Using an OPTICAL cable

1. Connect the OPTICAL IN jack on the back of the
unit to OPTICAL OUT jack on the TV using an
OPTICAL cable.
2. Select the input source to OPT/HDMI ARC
by pressing F button on the remote or unit
repeatedly.
You can see "OPTICAL" on the display window if
connecting normally between this unit and your
TV.
,
Note
y Before connecting the optical cable, be sure
to remove the protection plug cover if your
cable has the cover.
y You can enjoy the TV audio through the
speakers of this unit. In the case of some TV
models, you must select the external speaker
option from the TV menu. (For details,
reference your TV user manual.)
y Set up the sound output of TV to listen to
the sound through this unit :
TV setting menu [ [Sound] [ [TV Sound
output] [ [External speaker (Optical)]
y Details of TV setting menu vary depending
on the manufacturers or models of your TV.
y If this unit is connected by OPTICAL and ARC
at the same time, the ARC signal is a high
priority.
Optical cable