Various Function; Setting The Clock; Key Lock; Setting The Off Timer - LG 21FU4RL Owner's Manual

Various function

Setting the Clock

Before setting the on/off timer, first you should set
the current time.

Setting the Off Timer

This is the function to automatically switch the TV
to standby mode at a preset time.
Note: If the same time is set for the on time and
off time, only the off time operates.

Setting the On Timer

This is the function to automatically turn the TV on
at a preset time and channel.
Notes: •If you don't press any button within 2 hours
after turning on the TV set by ON TIMER function, the
set will be automatically switched back to standby mode.
•TV must be in standby mode for the On timer to work.
Setting the Sleep Time
You don't have to remember to switch the TV to
standby mode before you go to sleep. The sleep
timer automatically turns the TV off after the
preset time elapses.
Press the SLEEP button to select the desired
sleep time.
Each time you press this button, the sleep time is
displayed one by one as shown below. The timer
begins to count down from the number of minutes
selected.
---
10 20 30 60 90 120 180 240
Notes: •After a few seconds, the desired sleep
time will disappear and be operated automatically.
•To view the remaining sleep time, press the
SLEEP button once and the remaining sleep time
will be displayed.
•To cancel the sleep time, select the
mode by using the SLEEP button.

Auto Off

If there is no input signal, the TV is switched to
standby mode automatically in 10 minutes.
1. Press the MENU button and then use the
button to select the Timer menu.
2. Press the G and then use the
select Auto off .
3. Press the G and then use the
select On or Off .
4. Repeatedly press the MENU button to exit.
Game (some models)
You can enjoy the TV game with this set.

Key Lock

The TV can be set so that the remote control is
needed to control it.
This feature can be used to prevent unauthorized
viewing.
Notes: •With the key lock on, the display
appears on the screen if any button on the
Lock
front panel is pressed while viewing the TV.
•This programmed to remember which option it
was last set to even if you switch the TV from
standby mode.
Auto Demonstration (some models)
Auto demonstration allows you to review all the
menus programmed in the TV set.

Favorite channel memory

Favorite channel memory is a convenient feature
that lets you quickly scan up to eight channels of
your choice without having to wait for the TV to
scan through all the in-between channels.
To select the favorite channel, repeatedly press
the FCR (Favorite Channel Review) button. Eight
channels programmed appear on the screen one
by one.
Adjusting the Fine
This function is to adjust the picture if poor signal
received from broadcasters causing horizontal
stripe, twisted picture, no color, and/or noise.
1. Press the MENU button and then
the until the menu is displayed as shown right.
2. Press the
Manual.
3. Press the
SLEEP ---
Fine
4. Press the
5. Press the
picture condition.
6. Press the ENTER (
7. Repeatedly press the MENU button to exit.
/
D E
Notes : • To release the memorized fine tuning,
program again the fine-tuned channel by AUTO
/ button to
D E
PROGRAM or MANUAL PROGRAM.
•If the finely tuned channel is memorized, the color
D / button to
E
of the channel number changes to yellow.
6
G and then / button to select
D
E
.
G and then / button to select
D
E
.
G button to enter the Fine
F / G button to tune the desired
) button to memorize.
A
Key
/ button
D
E
mode.