Page 6
Safety Warning 1. PLEASE READ THESE INSTRUCTIONS CAREFULLY AND COMPLETELY BEFORE ASSEMBLING YOUR GREENHOUSE. 2. Sharp edges and corners can cause injury. Always wear protective glasses, gloves, shoes and headgear when handling the aluminium profiles, glass and polycarbonate sheets. Broken glass is a safety hazard – always clear up immediately and dispose of with care. 3.
Page 7
Assemble end middle bars (7346) (7347) to (6b.11). Please do not over tighten. the end bars and the roof corner bars using 7. glazINg oVeRVIew plate (7348) (4a.11). Connect roof vent lifter (7090) to (7366) using two screws (1006) (5.8) (5.9). Please sort the glazing according to your Position the assembled frame against the wall model size and glazing type before beginning.
Page 8
Position panes E and F. from outside (8.9b). Neutral silicone is not Connect capping‘s (7377) or (7378) and then provided. (7375) / (7379) or (7376) / (7380) loosely. FINIShINg Tighten all nuts. Please do not over tighten. If desired, it is possible to seal the greenhouse at the edges using neutral silicone.
Need help?
Do you have a question about the Helena 7000 and is the answer not in the manual?
Questions and answers