9-Troubleshooting - Haier HW70-12829 User Manual

9-Troubleshooting

Many occuring problems could be solved by yourself without specific expertise. In case
of a problem please check all shown possibilities and follow below instructions before you
contact an after sales service. See CUSTOMER SERVICE.
WARNING!
▶ Before maintenance, deactivate the appliance and disconnect the mains plug from
the mains socket.
▶ Electrical equipment should be serviced only by qualified electrical experts, because
improper repairs can cause considerable consequential damages..
▶ A damaged power cable should only be replaced by the manufacturer, its service
agent or similarly qualified persons in order to avoid a hazard.
9.1 Information codes
Following codes are displayed only for information referring to the washing cycle. No
measures must be performed.
Code Message
The remaining wash cycle time will be 1 hour and 25 minutes.
1:25
The remaining wash cycle time including chosen end-time delay will be 6 hours and 30 min-
6:30
utes.
End The washing cycle is finished. The appliance shuts off automatically.
cLo1- Function child lock is activated.
Door is closed because of high water level, high water temperature or spinning cy-
LocI -
cle.
bEEP OFF The buzzer is deactivated.
bEEP ON The buzzer is activated.
9.2 Troubleshooting with display code
Problem Cause
E1 • Drainage error, water is not fully drained
within 6 minutes.
• Lock - error.
E2
• Water level not reached after 10
E4
minutes. at the latest.
• Drain hose is self-syphoning.
• Water protective level - error.
E8
• Temperature sensor - error.
F3
• Heating error.
F4
22
Solution
• Clean pump filter.
• Check drain hose installation.
• Shut the door properly.
• Make sure that tap is fully opened and water
Pressure is normal.
• Check drain hose installation.
• Contact the After sales service.
• Contact the After sales service.
• Contact the After sales service.
GB