Ro-Man HMA 2000 Installation Manual

HMA – 2000

Installation Guide

Water Purification Systems

Our systems are some of the most advanced water purifiers available.

Designed to create perfect water for your pond or tank resulting in high quality water

All Ro-man systems are built in our own UK workshop and are fully assembled for ease of

installation.

1 - Two stage filtration system mounted on a metal bracket

1 - Complete cartridge set

1 - ¼" Flow control valve

1 - PTFE tape

1 - Filter wrench

1 - Mains Pipe Clamp

1 - 2 Metres Red Tubing

1 - 2 Meters Blue Tubing

Spear Filters:

1 - CBR2 Filter

1 - Sediment Filter

www.ro-man.com

Helpdesk@ro-man.com

T: 01823698813

Table of Contents

Do you have a question about the HMA 2000 and is the answer not in the manual?

Page 1: Installation Guide
Designed to create perfect water for your pond or tank resulting in high quality water In The Box All Ro-man systems are built in our own UK workshop and are fully assembled for ease of installation. 1 - Two stage filtration system mounted on a metal bracket 1 - Complete cartridge set 1 - ¼”...
Page 2 . Lead reduction through 1666 uk gallons. 99.95% reduction of Cryptosporidium and Giardia cysts. CBR2 filters will not dramatically alter TDS or pH. For extra protections and longer life the CBR2 filter is protected by a sediment filter www.ro-man.com Helpdesk@ro-man.com T: 01823698813...
Page 3 We recommend that filters should be replaced every six months to ensure your purification is working to the highest capacity Further Support If you experience problems or require additional help please contact our support team www.ro-man.com Helpdesk@ro-man.com T: 01823698813...
Page 4 15-9 mm pipe. Once the saddle assembly is fitted put the other end of the red pipe in water container and close the tap on the saddle valve to pierce the pipe, you may need to open and close this several times to clean the bore off. www.ro-man.com Helpdesk@ro-man.com T: 01823698813...