Download Print this page

Kenwood Sirius KTC-SR901 Quick Start Manuals page 7

For use with kenwood head units and in-dash televisions
Hide thumbs

Advertisement

KTC-SR901 Sirius® Satellite Radio Tuner
Quick-Start Guide for:
Z910DVD
AUD
LOUD
DISP
NAME.S
ATT
Step 1: Get your unit's individual Electronic
Serial Number (ESN):
a) Press the SA button (
b) Use the Scan Forward and Scan Backward but-
tons (
) to scroll through the menu until "ESN
2
XXXXXXXX" appears on the display
c) Write the number down
d) Press the SA button (
Step 2: Subscribe to the Sirius Satellite
Radio service
a) Make sure your vehicle has the radio "ON" and
the antenna has a clear view of the sky with no
obstructions (buildings, garage, etc.)
b) Have your Vehicle Identification Number (VIN)
from the vehicle that the radio is installed in
c) Have your unit's ESN and your credit card num-
ber handy
d) Contact SIRIUS on the web at siriusradio.com or
call toll-free: 1-888-539-SIRIUS (7474)
e) The operator will instruct you further
• Your tuner should be able to receive Sirius
Satellite Radio signals almost immediately after
you subscribe
Step 3: Searching for program categories
and channels:
a) Press the AM button (
through the available program categories
b) Press the Scan Forward and Scan Backward
buttons (
) to change channels within the
2
selected category
SCROLL
SCAN
RDM
REP
1
2
3
4
5
)
) to exit
) repeatedly to search
3
M.RDM
AUTO
AME
5
6
• If there are no channels available in a category,
the tuner will automatically switch to the next
category
Step 4: Display settings setup:
a) Press the SA button (
setup mode
b) Use the Scan Forward and Scan Backward but-
tons (
)to scroll the following information on
2
the display's top line: Band & Channel
Number/Channel Name/Song Title/Artist
Name/Album Title/Category Name
c) Use the AM/FM buttons (
following information on the display's bottom
line: Album Title/Artist Name/Song Title/Channel
Name
• You cannot display the same information on
both the top and bottom display lines
d) Press the SA button (
play mode
Step 5: Setting channel presets:
a) Press and hold preset buttons 1-6 (
tuning to desired program and channel
S.A
2ZONE
2
DAB
SRC
4
FM
+
MENU
NF
DISC
-
AM
3
)to get into the display
) to scroll the
3
4
,
)again to exit the dis-
) after
5

Advertisement

loading

  Related Manuals for Kenwood Sirius KTC-SR901