Tables Of Set Mode Operations - Yaesu FT-70DR Operating Manual

Tables of Set Mode Operations

No. Set Mode item
1 ANT.ATT Switch the attenuator between ON/OFF.
Set the length of time until the transceiver
2 APO
turns off automatically.
3 BCLO Turns the busy channel lockout function on/off.
4 BEEP Sets the beep sound function.
5 BEP.LVL Beep volume setting
Sets the beep sound ON or OFF when a
6 BEP.EDG
band edge is encountered.
Sets the beep sound ON or OFF when the
7 BEP.STB other station completes transmission in the
Digital Mode.
8 BELL Set the bell function settings.
9 BNK.NAM Assign a name to each memory bank.
Turn the MODE/STATUS Indicator ON or
10 BSY.LED
OFF while receiving signals.
11 CLK.SFT Set the clock shift function.
12 DC VLT Display the voltage.
Select a combination of DCS inversion
13 DCS.INV
codes in terms of communication direction.
Set the brightness level of the LCD
14 DIMMER
backlight and numeric keypad light.
15 DIG.POP Set the POP UP display time.
16 DIG VW Turn the VW mode selection ON or OFF.
DP-ID list ( Display/Register/Clear )
17 DP-ID
18 DT DLY Set the DTMF code transmission delay time.
Select and edit the DTMF auto dialer mem-
19 DT SET
ory channel.
20 DT SPD Set the DTMF code transmission speed.
Set the priority memory channel monitoring
21 DW INT
interval during Dual Receive.
Configure the scan stop mode settings for
22 DW RSM
Dual Receive.
Turn the "Priority Channel Revert" feature
23 DW RVT
ON or OFF during Dual Receive.
Select the beep option while receiving digi-
24 GM RNG
tal GM information.
Set the transmission interval of digital GM
25 GM INT
information.
Select the function of the [ HOME/REV ] key.
26 HM/RV
Turn transfer VFO to the Home channel ON
27 HM-VFO
or OFF.
Set the duration time of the backlight and
28 LAMP
keys to be lit.
29 LED.LGT Turn ON the LED light.
30 LOCK Configure the lock mode setting.
36
Description
FT-70DR/FT-70DE Operating Manual
Selectable options
( Options in bold are the default settings )
OFF / ON
OFF / 0.5 Hours to 12 Hours
OFF / ON
OFF / KEY+SC / KEY
LEVEL1 – LEVEL4 – LEVEL7
OFF / ON
OFF / ON
OFF / 1 T–20 T / CONT ( Continuous ringing )
( up to 6 characters )
LED.OFF / LED.ON
A / B
( Voltage )
RXN.TXN / RXR.TXN / RXB.TXN / RXN.
TXR / RXR.TXR / RXB.TXR
LEVEL1 – LEVEL6
OFF / 2 SEC – 10 SEC – 60 SEC / CONT
ON/OFF
( Registered DP-ID )
50MS / 250MS / 450MS / 750MS / 1000MS
CH0 / CH1 – CH9
50 MS / 100 MS
0.1 S – 5.0 S – 10.0 S
2.0 S – 10.0 S / BUSY / HOLD
OFF / ON
OFF / IN RNG /ALWAYS
OFF / NORMAL / LONG
HOME / REV
OFF / ON
OFF / 2 SEC – 5 SEC – 10 SEC / CONT
( LED lights up )
KEY / DIAL / K+D / PTT / K+P / D+P / ALL