Table of Contents
Advertisement
APPENDIX C: ASHBY LOUDSPEAKERS SPECIFICATIONS
Current Draw
Idle Current
Maximum Long-term
Continuous Current (> 3 s)
Maximum Instantaneous
Peak Current
Meyer Sound power supply is required. See the datasheet for the Meyer Sound MPS-488HP IntelligentDC External Power
Supply for information and specifications.
NOTES
1. Amplifier wattage rating based on the maximum unclipped burst sine- wave rms voltage the amplifier will produce for at
least 0.5 s into the nominal load impedance: 30 V rms (42 V peak).
2. Tolerates voltage drops up to 30 percent due to long cable runs. Normal operating conditions with recommended cable
gauge, length, and number of speakers assures peak SPL to remain within 2 dB of maximum SPL specification.
24
Ashby-5C
0.16 A rms
0.32 A rms
1.7 A peak
Ashby-8C
0.16 A rms
0.78 A rms
3.10 A peak
Advertisement
Table of Contents
