Table of Contents
Advertisement
16
www.husqvarna-electrolux.se
8.8 Door reversibility
1. Remove the ventilation grille.
Remove the upper filling and install it
on the opposite side of the grille.
2. Lay down the appliance back side
down on a wooden support.
3. Unscrew the handle from the bottom
and the top of the door (1, 3) and the
screw on top of the handle (2).
1
4. Unscrew the hinge (1) and remove
the cover plate (2).
5. Remove the support (3) and install
the cover plate and hinge on the
opposite side. Install the support on
the opposite side.
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
2
3
1
3
6. Unscrew and move the lower hinge
(1).
7. Move the pin to the opposite side
(2).
8. Unscrew the support (3).
9. Screw on the lower hinge and the
support on the opposite side (4, 5).
10. Tighten the pin with the adjustment
spanner supplied.
4
3
11. Install the handle on the opposite
side.
12. Raise the appliance and install the
ventilation grille.
13. Put the cabinet in position.
CAUTION!
Reposition, level the
appliance, wait for at least
four hours and then connect
it to the power socket.
2
1
5
2
Advertisement
Table of Contents
