Option Tab - Panasonic KX-TDE100 Configuration Manual

Basic Channel setup:
Please locate the OnSIP SIP Trunks account details from your OnSIP
account Welcome letter/email....
Main tab:
o
According to the standard OnSIP SIP trunk account, we need to configure the Basic Channel Port
as follows:
"Please Note: the information provided below is just a sample, please locate
your account details in your OnSIP welcome letter/email"
1- Port 1 channel attribute = Basic channel
2- Provider name= OnSIP
3- SIP Server Name= "
4- SIP server port number =5060
5- SIP service Domain = "[username].onsip.com" example :
panasonic.onsip.com
6- Subscriber number = 1234567890 (OnSIP Account DID/BTN)
Account tab:
o
1-
user name ==
panasonic
2-
Authentication ID==
3-
Password ==
sensitive entry)
Register Tab:
o
Changes from Default settings:
1-
Register server address= "[username].onsip.com" example :
panasonic.onsip.com
NAT Tab:
o
Same as default

Option Tab:

o
Same as default
Calling Party tab:
o
Same as default
Called party Tab:
o
Same as default
3/21/2013
Rev1
"
sip.onsip.com
where panasonic
( Please provide your account sip username) example=
same asUsername
( Please provide your account Authentication Password, Case
where panasonic
is Username provided by OnSip
is Username provided by OnSip
10