Reference Manual
00809‐0200‐xxxx, Rev AA
April 2010
Product Certifications
Approved Manufacturing Locations
Rosemount Inc. – Chanhassen, Minnesota, USA
Emerson Process Management Asia Pacific Private Limited – Singapore
Telecommunications Compliance
All wireless devices require certification to ensure that they adhere to regulations regarding the use of the RF
spectrum. Nearly every country requires this type of product certification. Emerson is working with governmental
agencies around the world to supply fully compliant products and remove the risk of violating country directives or
laws governing wireless device usage.
FCC and IC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions. This device
may not cause harmful interference. This device must accept any interference received, including interference that
may cause undesired operation. This device must be installed to ensure a minimum antenna separation distance of
20 cm from all persons.
Ordinary Location Certification for FM
As standard, the Gateway has been examined and tested to determine that the design meets basic electrical,
mechanical, and fire protection requirements by FM, a nationally recognized testing laboratory (NRTL) as
accredited by the Federal Occupational Safety and Health Administration (OSHA).
North American Certifications
I5
FM Division 1, Intrinsically Safe, Non‐Incendive and xxx
Certificate Number: XXXXXXX
XXXXXXXXXX
XXXXXXXXX
I6
CSA Division 1, Intrinsically Safe
Certificate Number: XXXXXXX
XXXXXXXXXX
XXXXXXXXX