Advertisement
4.
Remove the driver's dashboard lower cover:
•
Remove the fuse lid (four retaining tabs), and
open the pocket.
•
Remove the two self-tapping screws.
•
Gently pull out on the driver's dashboard lower
cover to release the eight clips, unplug the
vehicle connector and remove the lower cover.
VEHICLE CONNECTOR
POCKET
CLIPS (8)
5.
Remove the kick panel (two clips and pull).
2 of 6
DRIVER'S
DASHBOARD
LOWER
COVER
RETAINING
TABS (4)
FUSE LID
SELF-TAPPING
SCREW
CLIPS (2)
KICK
PANEL
6.
Open the hood. Loosen the battery bracket nut.
Remove the radiator cover (seven clips and one
bolt).
CLIPS (7)
7.
Remove the one bolt and three clips that fasten
the left front inner fender, and pull the inner fender
out in the direction shown. Take care not to
damage the clips.
LEFT FRONT
INNER FENDER
AII 24665 (0210)
BATTERY
BRACKET NUT
RADIATOR
COVER
CLIPS (3)
TORX BOLT
© 2002 American Honda Motor Co., Inc - All Rights Reserved.
BOLT
Advertisement
