Page 1
This manual shows the appropriate crimping process by using the proprietary tools and quality control standards. Since the applicable range of tools and product specifications of connectors may not be met with each other, please contact us when using. KYOCERA ELCO Corporation...
Page 2
HAND CRIMPING TOOLS Type Structure of the Tool and Part Names Locator pin Tool identification number Crimper Anvil Figure A" Cladding insulation crimper Wire crimper Ratchet Crimper Contact Cladding insulation This tool can crimp an applicable wire easily with a set of crimper and anvil. No need to replace the crimper and anvil.
Page 3
Type B Structure of the Tool and Part Names Locator pin Tool identification number Crimper Ratchet Crimper fixing screw Contact feed bar Anvil Crimper Head Movable cutter Fixing screw Wire crimping part With this tool, a strip of contacts can be crimped easily with the applicable wire Wires Grip Anvil...
Page 4
Type C Structure of the Tool and Part Names Single head Wire size Tool identification number Ratchet Dual head Wire size Tool identification number Ratchet Example of Failure Procedures Failure Item Failure Description Cause 1.Make sure that the tool number and the wire size are met. Pull strength is out of specification.