PULSE TRAIN INPUT—V500
7.2 Terminals
Symbol
PIN
Pulse input terminal 1
PO
Pulse input terminal 2
REMARKS
*: Whether an input pulse is entered into PIN or PO depends on the wiring. Refer to page 83.
7.3 Adjustment
Factory setting
(1500r/min)
Bias
Pr. 385
0
Input pulses (PPS)
Terminal
Terminal used to enter a pulse train of 0 to 100kpps (*)
Terminal used to enter a pulse train of 0 to 100kpps (*)
Pr. 386
Gain
Maximum number of pulses
Description
Note: Maximum number of input pulses: 100kpps
Note: Number of input pulses are multiplied by 2
internally.
84