Mitsubishi Electric FR-A5AP Instruction Manual page 77

ORIENTATION CONTROL AT A MACHINE END— V500
CAUTION
• Values in parentheses indicate binary data entered from the input terminals of the FR-A5AX. If
the position pulse monitoring (Pr. 52 "DU/PU main display screen data selection" = 19) is
selected, the data monitored is not the number of stop positions but is 0 to 65535 pulses.
(For the FR-DU04
-1
• When any of "1 to 127" is set in Pr. 360, parameters (Pr. 300 to Pr. 305) of the FR-V5AH are made invalid.
(Parameters are valid when Pr. 360="0".)
• Terminal DY (Data read timing input signal) is made invalid.
(The position data import is performed at the start of orientation.)
• When the option is not fitted or Pr. 360="0", the stop position is 0 even if the external stop
position command is selected with the Pr. 350 setting.
, 0 to 9999 are displayed.)
70