Input Compensation Of Multi-Speed And Remote Setting (Pr. 28) - Mitsubishi Electric F700 Instruction Manual

3.5.3

Input compensation of multi-speed and remote setting (Pr. 28)

By inputting the frequency setting compensation signal (terminal 1, 2), the speed (frequency) can be
compensated for relative to the multi-speed setting or the speed setting by remote setting function.
Parameter
Name
Number
Multi-speed input
28
compensation selection
The above parameters can be set when Pr. 160 User group read selection = "0". (Refer to page 140)
REMARKS
⋅ Select the compensation input voltage (0 to ±5V, 0 to ±10) and used terminal (terminal 1, 2) using Pr. 73 Analog input
selection.
♦ Parameters referred to ♦
Pr. 4 to Pr. 6, Pr. 24 to Pr. 27, Pr. 232 to Pr. 239 (multi-speed operation)
Pr. 73 Analog input selection
Pr. 59 Remote function selection
Initial Value
0
Refer to page 125
Refer to page 72
Frequency setting by external terminals
Setting Range
0 Without compensation
1 With compensation
Refer to page 67
Pr.27
page 67
Pr. 29
page 77
Description
71
3